INVERSYS PLUS Series


Up to %35 energy saving with variable speed and directly coupled drive system. Oil injected rotary screw compressor. Responds the all requirements between 5.5 kW and 315 kW. For special requirements please call us.  

VIDEO SEE ALL IMAGES

Dowloand Document

MODELS AND TECHNICAL INFORMATION

ModelPressureCapacity*Motor PowerConnection SizeReceiver Volume/Dryer ModelDimensions (mm)WeightNoise**
barpsiMinimum m3/min - cfmMaximum m3/min - cfmkW/HPLengthWidthHeightkgdB(A)
INVERSYS 5 PLUS7.51100.38111.03325,5/7,5G 1/2”200-250L102565095023569
101450.37100.8327HRD 30
131900.36140.6423
INVERSYS 7 PLUS 7.51100.42141.4427,5/10G 1/2”200-250L102565095025570
101450.43131.235HRD 40
131900.43120.9529
INVERSYS 11 PLUS7.51100.77271.86411/5G 3/4”500L1175730100030569
101450.81291.6157HRD 40
131900.74161.346
INVERSYS 15 PLUS 7.51100.99352.8510115/20G 3/4”500L1175730100034571
101450.97342.3382HRD 50
131900.99352.0773
INVERSYS 18 PLUS 7.51101.1373.512418,5/25G 1”-1275850146546571
101451363106
131901.1382.692
INVERSYS 22 PLUS 7.51101.3324.214022/30G 1”-1275850146550071
101451.3323.8124
131901.229399
INVERSYS 30 PLUS7.51101.22435.318730/40G 1 1/4”-15751030175069571
101451.22434.6162
131901.21434141
INVERSYS 37 PLUS7.51101.3466.824037/50G 1 1/4”-15751030175071571
101451.3455.8205
131901.3445177
INVERSYS 45 PLUS 7.51101.3467.626845/60G 1 1/4”-15751030175094573
101451.2436.8240
131901.2445.9208
INVERSYS 55 PLUS7.51102.5889.935055/75G 1 1/2”-200012001810129075
101452.4848.2290
131902.6917.4261
INVERSYS 75 PLUS7.51102.69112.945675/100G 1 1/2”-200012001810139077
101452.58810.9385
131902.5889.6339
INVERSYS 90 PLUS 7.51106.222016.859390/125G 2”-250014002037202078
10145621314.4509
131906.222112.3434
INVERSYS 110 PLUS7.51106.6323420.1710110/150G 2” -250014002037238078
101457.1125117.3611
131907.0424915530
INVERSYS 132 PLUS7.51106.924424.3858132/180G 2 1/2”-275018052000255578
101456.823920.3717
131909.7434418.1639
INVERSYS 160 PLUS7.51106.823928.2996160/220G 2 1/2”-275018052000276078
101457.1325224.6869
131908.529921.7766
INVERSYS 200 PLUS7.511014.0349537.51324200/270DN80-325022502450446079
1014513.949032.31141
1319013.8148828.81017
INVERSYS 250 PLUS7.511013.647945.21596250/340DN100-325022502450560079
1014513.5147738.51360
1319013.547533.51183
INVERSYS 315 PLUS7.511013.246654.11911315/430DN100-325022502450600079
1014513.2346744.31564
1319012.93457381342

General Information

INVERSYS PLUS series screw air compressors have been produced in order to work successfully in different application areas. High performance and quality parts used in the manufacture and assembly of products designed to be easily adaptable and user-friendly at every level provide long maintenance intervals and consequently low operating costs.

 

DALGAKIRAN operates in more than 100 countries worldwide and has more than 150 authorized dealers in Turkey. With its after sales service network providing continuous service for more than 25 days and its customer support line which can be reached from all over Turkey from 444 in 2012, Products to be used safely.

 

 

  • New generation of screw blocks, designed with the benefit of the latest technology such as "Computational Fluid Dynamics (CFD)" and "Finite Element Method (FEM)" and manufactured with advanced manufacturing techniques, new rotor profile and lobe combination provide high efficiency, It offers consumption.
    There is a new generation of ball bearing tilt system with 3 times more load carrying capacity than standard designs.
    With the optimal lobe combination, the new rotor profile allows less air escape and reduces torque requirements, resulting in a significant reduction in energy costs.
  • In the INVERSYS PLUS series high efficiency and high speed, IE2 energy class, IP55 engines suitable for driving with inverter are used as standard.
    Unlike star-triangle and soft-starter motor drive methods, low-energy loss and high performance inverter equipments provide a significant energy savings as well as avoiding unnecessary stop-and-start wear of the motor by adjusting the motor speed according to the desired flow capacity.
    The drive of the screw rotor shaft takes place directly between the screw block and the main motor with a flexible coupling with 1: 1 transmission.
    Unlike other power transmission systems, mechanical losses are reduced to the minimum level by means of a direct coupling transfer system to save energy.
    By not using the belt-pulley mechanism, noise and vibration levels are noticeably reduced.
  • FEM and "Fluid Dynamics".
    The simple design of the suction regulator, which consists of three control block units, a solenoid valve and a control cylinder, ensures that periodic maintenance is easy.
    Suction regulator provides reliable working performance up to 8000 hours with the use of first class materials in manufacturing, reduced number of gaskets in design.
    The suction valve promises low pressure drops and high performance with a fully upright position, almost straight and unidirectional air flow, a new profile design and a 25% increase in air exit area when the suction valve is open.
    The two-stage air intake filter system, consisting of a replaceable microfiber glass front panel filter and cassette-type air inlet filter with interchangeable paper elements, minimizes problems that may occur in dusty environments by providing fresh air for the screw block and cooling system.
  • It achieves a more efficient decomposition at a lower volume with deep-bedded separating layers.
    It has a performance design that provides 3-step decomposition.
    After separation, a low oil solubility of 3 mg / m3 is obtained.
  • The aluminum combi cooler with long-lasting Bar / Plate system guarantees trouble-free operation in all kinds of conditions.
    The four-way thermostatic valve prevents water condensation at low temperatures, extending oil life and eliminating risk of failure.
    The new wing profiles are supported by quiet and efficient axial fans driven by a main motor independent electric motor.
    It has new fan nests which are easy to clean and provide service in a short time.
    With variable speed control fans, independent of the main motors, effective cooling is ensured so that the compressor is kept at the optimum working temperature, thus compressing the air with high performance and efficiency. (Except INVERSYS + 5P-22P and water-cooled models)
  • Main motor and fan motor overcurrent control
    Phase sequence, deficiency and imbalance control
    Main motor temperature control with PTC
    Screw extreme temperature control system
    High pressure control system
    Separator pollution warning system
    Air filtration pollution warning system
    High pressure relief valve
    Separator tank safety valve
    Emergency stop button
    Service warning system
  • It has an LCD control panel that shows the operation and service functions in a way that everyone can easily understand.
    Mechanical safety systems are supported by PLC controlled safety switches and relays.
    In electric panel design, brands which offer quality products in world standards have been preferred.
  • Canopy design requiring minimum working area
    Ergonomic design that provides ease of maintenance and allows easy intervention at every point of the machine
    Service closures that can be easily removed
    Vibration chocks made of special rubber that eliminate vibration and the problems it may cause
    Stainless and puncture resistant electrostatic powder paint
    Non-flammable canopy cover minimizing sound level
  • Highly efficient screw block
    380V / 3 phase / 50Hz high speed IE2 energy class inverter compatible IP55 main motor
    Inverter suitable for heavy working conditions
    Direct coupling drive system with flexible coupling
    Variable speed (VSD) fan (except INVERSYS + 5P-18P and water cooled models)
    Detachable acoustic canopy
    Rigid chassis base
    Micro glass fiber pre-filter with EU3 norm
    Air / oil separator and tank providing maximum oil solubility of 3 mg / m3
    Dry-type air filtration at 3 micron resolution
    Full flow oil filtration at 10 micron resolution
    Electropneumatic charge-empty suction valve
    Minimum pressure valve
    Thermostatic valve
    Quick relief valve and silencer
    LCD panel PLC control unit
    4000 hours working life with factory-filled oil
  • Water cooling system
    Air + water (Hybrid) cooling system with heat recovery
    Oil heater
    Water separator with automatic drainage system
    Other input voltage options except 380V / 3phase / 50Hz